|
|
|
|
 |
Techno's HDS is the result of two and a half decades of hard earned knowledge in the engineering and manufacturing of CNC routers. ..and sets a new standard in CNC router price to performance ratio. Combining top quality components, exceptional structural stiffness and a perfectly integrated AC servo control, the system features a performance level normally associated with competitive units costing far in excess of the HDS's modest asking price. Standard HDS features include:
Putting it all together...Built to perform...and last Over two and half decades Techno CNC systems have secured a well earned reputation for performance and durability. And, the HDS promises to continue this proud lineage. From raw material selection, through component fabrication and system assembly every HDS is the end product of aerospace level quality control; guaranteeing long term, precise, hassle free operation. |
|
Wondering if a Techno system can meet your requirements. No obligation test cuts are available. |
|
Machine Model |
Work Envelope |
Floor Print (W x L x H) |
Weight |
Repeatability |
Maximum Speed (in/min) |
Bridge Clearance |
Z-Axis Travel |
| 4848 | 48 48" | 78 x 71 x 60" | 2550 Lbs | ..0033 | 200 IPM | 7.5" / 11.5 | 9.0" / 13.0" |
| 4896 | 48 x 96" | 78 x 119 x 60" | 3300 Lbs | .003 | 2000 IPM | 7.5" / 11.5 | 9.0" / 13.0" |
| 60120 | 60 x 120" | 90 x 147 x 60" | 3450 Lbs | .003 | 2000 IPM | 7.5" / 11.5" | 9.0" / 13.0" |
| 60144 | 60 x 144" | 90 x 171 x 60" | 3650 Lbs | .003 | 2000 IPM | 7.5" / 11.5" | 9.0" / 13.0" |
| 60197 | 60 x 197" | 90 x 220 x 60" | 3950 Lbs | .003 | 2000 IPM | 7.5" / 11.5" | 9.0" / 13.0" |
| 78168 | 78 x 168" | 108 x 191 x 60" | 4150 Lbs | .003 | 2000 IPM | 7.5" / 11.5" | 9.0" / 13.0" |
| 78240 | 78 x 240" | 108 x 263 x 60" | 4550 Lbs | .003 | 2000 IPM | 7.5" / 11.5" | 9.0" / 13.0" |
| Standard system control and spindle power requirements are 220V / 3 Phase. Options available. |
|
|
Techno Videos |
| Material Processing Range | |||||
| Foam | Plastic | Wood | Composite | Solid Surface | Non-Ferrous Metal |
|
|
|
|
Machine Base The HDS machine base is fabricated from heavy-duty tubular steel with welded and stress relieved joints, and precision ground mounting surfaces. A combination of mass, rigidity and construction quality that insures minimum deflection, effective vibration damping and dimensional stability over the operational life of the machine. |
|
|
Gantry Assembly Featuring a combination of steel and cast iron construction with heavy duty gusseted reinforcement, the HDS gantry assembly provides highly rigid structural and jointed conditions that translate into minimumal deflection and effective vibration damping. |
|
|
THK Linear Bearings The HDS features THK caged ball linear bearing and rails on all three system axes. THK bearings are renowned for superior rigidity, low friction and wear, and significantly reduced rolling resistance versus conventional linear bearing technology. |
|
|
Atlanta Rack & Pinion The HDS features hardened and ground linear actuators from Atlanta Drive Systems, a world leader in rack and pinion technology. Zero backlash is achieved by means of a dual-pinion arrangement, providing precise positioning & repeatability. Positioning accuracy is maintained during acceleration & deceleration, as well as for travel reversals. |
 |
Alignment
The HDS near perfect system alignment is the by-product of
single setup 5-axis machining accuracy.
Drive train mounting surfaces are machined in a single operation
based on the same
zero or datum reference point. Resulting in rail and rack mounting
surface straightness, levelness and parallelism within (.001) of an
inch. |
|
|
HDS-OSAI - AC Servo Control In a span of over five decades OSAI controls
have gained a reputation for excellence in industrial automation,
aerospace, automotive, and all manufacturing operations where speed,
accuracy and smooth motion are critical. Flawlessly integrated with a highly rigid mechanical structure, the OSAI control represents the corner-stone of Techno's HDS system and a key element in the unit's outstanding performance and cut quality. |
|
|
HDS Hand-Held Control The HDS Hand-Held Control allows the freedom to move around the machine during setup and operation while providing basic control of machine functions, such as jogging . |
|
|
Biesse HSD / Auto Tool Change Spindle - (12) Horsepower Biesse HSD has a worldwide reputation for spindle designs that are extremely reliable and deliver extended life even in the harshest of environments. HSD spindles features labyrinth sealing and are manufactured in accordance with ISO standards. |
|
|
Eight Position Tool Magazine The HDS includes a (8) position tool magazine. Tool holders and collets are included in the basic system cost.
|
|
|
HDS Touch Pad The main difficulty with changing tools on spindles is adjusting the length of the new tool to match the previous tool so that the toolpath can continue at the correct height of machining. The touch pad accomplishes the task, with precision, at the touch of a button.
|
|
|
Material Alignment Pins The HDS features pneumatic alignment pins which
enable material to be easily and accurately positioned on the system
work surface. |
|
|
Vacuum Plenum The HDS vacuum plenum surface is multi-zoned which allows the operator to easily switch from full sheet processing to smaller part processing, .Zones can be turned on/off easily via control valves on the front of the machine. Systems also available with T-Slot surface. |
 |
Putting It All Together A chain is only as strong as its weakest link |
 |
 |
Becker Vacuum Pumps Techno offers a range of Becker vacuum pumps.
Becker pumps have a renowned reputation for performance and
durability, and have stood at the leading edge of pump technology
advancement for over a hundred years. |
|
|
|
|
