Techno’s LC Orthotic CNC Routers are aimed directly at the requirements of orthotic laboratories.  Available in single and multiple cutting head configurations these systems offer the industry’s best price to performance ratio for insole production and hard material modeling.  Designed for continuous duty cycles they are extremely rigid yet light enough to travel at high speeds, a combination that minimizes vibration while increasing accuracy and repeatability.


Built on engineering principles that have long been accepted as the foundation blocks for long term, accurate & dependable CNC operation, the Orthotics Routers feature: ground/hardened steel rails, recirculating anti-friction linear bearings, high-performance ball screws, anti-backlash ball nuts and servo control.


The Orthotic CNC Routers can be interfaced with virtually every orthotic's manufacturing software and come standard with a vacuum hold down arrangement which enables rapid and secure part fixturing in a broad range of materials


Material processing capabilities include: wood, plastics, foam, MDF and more.

For less demanding production requirement single cutting head systems represent the most economical buy.


Units can be configured with either brush or brushless type spindles (spindle info).

 

Systems without vacuum hold-down start at $12,000.

 

Complete systems include: LC 30 x 24” CNC Router, (1) Spindle, Vacuum Table / 2 HP Vac. Pump and Interface Software.

 

Complete system cost, brush spindle-$18,850.

 

Complete system cost, brushless spindle-$20,500.

For light material processing units can be configured with increased “Z” axis clearance.

To increase the range of orthotic fabrication capabilities, systems can be configured with rotary tables that support true 4-axis motion.

 

Multiple cutting head units are configured specifically to provide high insole production rates. Their advantage is based on the simple premise that three insoles can be produced in the same time it takes to produce one insole on a single cutting head.

Units can be configured with either brush or brushless type spindles (spindle info ),

Complete system include: LC 30 x 24” CNC Router, (3) Spindles, Vacuum Table / 2 HP Vac. Pump and Interface Software.

Complete system cost, (3) brush spindles-$20,750.

Complete system cost, (3) brushless spindles-$27,700.

 

 

Techno Orthotic Router Specifications

Machine Model

Work Envelope (X x Y)

Floor Print (W x L x H)

Repeatability

Resolution

Maximum Speed in/min

Bridge Clearance

Z-Axis Travel

3024

30 x 24

47 x 58 x 60"

.001

.0002

250 ipm

5.0"

8.7"

 

• Designed for continuous heavy-duty applications

• Drive System: Ball screws with anti-backlash ball nuts (Z Ψ16, X Ψ16 mm, Y Ψ25 mm

• 3D linear, 2-axis circular (XY, XZ, YZ) toolpath capability
 

• 4 patented double bearing blocks on XZ axes, THK rails and bearings on Y-axis

 

• Protection: Integral covers with rubber seals on X- and Z- axes
 

 

• Home reference and far end limit switch with a repeatability of ± 0.01 mm

• System servo control features: 16 inputs and 8 outputs, real-time reporting of position and velocity, up to (4) axis control

 

• Heavy-duty aluminum T-Slot table surface which can easily be upgraded for vacuum table hold- down

• 4 T-slots on 50mm centers are provided to mount the tools on Z-axis

 

• Thrust: 200 lbs. (115 kgf) on all axes at low speed


 

• Repeatability: ±.001"
 

• Accuracy: ±.0004"/in

 

• Resolution: .0002" on all axes

 

• Rapid travel: 250 IPM


• Cutting feed rate: 200 IPM

 

 

• Techno Windows-based G-Code Interface is included with the system. It provides production logging and reporting, infinite look-ahead, continuous motion, jog routines and so on.  Free software updates via the internet

 

• Moving gantry, to provide large work surface with minimal foot print
 

• 24VDC input/120VAC output relay to turn router ON/OFF automatically
 

• Tool calibration touch pad

 

• Ships assembled and tested

 

Techno Orthotic Router Options

Machine Stand

System Computer

Cad/Cam Software

Geometrics     200 Martin Lane    Elk Grove Village, IL  60007

847-338-0524