The Difference is in the Details

Techno’s ability to consistently deliver eye-popping text and graphics is the result of systems built on engineering principles that have long been accepted as the foundation blocks for long term, accurate & dependable CNC operation.

Cut to Print Option

Techno's Vision option features a digital camera that automatically locates reference markers on a print file, verifies the image and adjusts it for linear and rotational distortion. The Vision Software, in operation with Techno's GCODE CNC Interface, transfers this information to the CNC Router allowing customers to route digital prints almost effortlessly. This system seamlessly integrates with traditional graphics programs and quickly mounts on all Techno CNC Routers.

Universal Knife Option

Techno’s Universal Knife System utilizes a single drive system that provides rotary motion to various interchangeable heads. These interchangeable heads include the Oscillating Knife / Saw, Tangential Drag Knife, Spring Loaded Pen, Vinyl Drag Cutter and Creasing Wheels. Depending on the substrate being cut, companies can choose from hundreds of blades designed to meet their specific needs.

Get the full details

To check out Techno systems in the cut just chose the below links.

Machine Model	Work Envelope (X x Y)	Floor Print (W x L x H)	Repeatability	Resolution	Maximum Speed in/min	Bridge Clearance	Z-Axis Travel
			.001	.0002	250 ipm 800 ipm	5.0"	8.7"
4848	50 x 50	74 x 83 x 60"
4896	50 x 96	74 x125 x60"
59120	59 x 120	109 x 149 x 60"
78120	78 x 120	109 x149 x 60"

Available in 10 models, Techno's 18+ years of CNC design and build expertise can be seen in the modular design of the LC Series. You can purchase a base LC system for a small initial investment and then build as you go. The LC is designed for continuous duty cycles and is extremely rigid yet light enough to travel at high speeds, a combination that minimizes vibration while increasing accuracy and repeatability. LC models are available in a standard speed (250 ipm) or high speed (800 ipm).

Built on engineering principles that have long been accepted as the foundation blocks for long term, accurate & dependable CNC operation, LC models feature: precision ground steel machine bases, ground/hardened steel rails, recirculating anti-friction linear bearings, high-performance ball screws, anti-backlash ball nuts and servo control.

Typical LC Graphics Configuration Cost

Based on LC Series 4896 XYZ Table:

Includes: Spindle and Vacuum Hold Down - approximate cost $30,000. to $35,000. .

Based on LC Series 4896 XYZ Table with Vision System:

Includes: Vision System, Spindle, Vacuum Hold Down, Computer - approximate cost $33,000. to $38,000.

Based on LC Series 4896 XYZ Table with Vision System/Tangential Knife:

Includes: Vision System, Tangential Knife, Spindle Vacuum Hold Down, Computer - approx cost $35,000 to $40,000..

Based on LC Series 4896 XYZ Table with Vision System/Universal Knife:

Includes: Vision System, Oscillating Knife, Spindle and Vacuum Hold Down, Computer - approx cost $40,000. to $55,000

All the above systems include EnRoute Software

Leasing Available

• Designed for continuous heavy-duty applications

• Drive System: Ball screws with anti-backlash ball nuts (Z Ø16, X Ø16 mm, Y Ø25 mm

• 3D linear, 2-axis circular (XY, XZ, YZ) toolpath capability

• 4 patented double bearing blocks on XZ axes, THK rails and bearings on Y-axis

• Protection: Integral covers with rubber seals on X- and Z- axes

• Home reference and far end limit switch with a repeatability of ± 0.01 mm

• Heavy-duty aluminum T-Slot table surface which can be upgraded for vacuum table hold- down

• Thrust: 200 lbs. (115 kgf) on all axes at low speed

• Repeatability: ±.001"

• Resolution: .0002" on all axes

LC STANDARD SPEED
• Rapid travel: 250 IPM
• Cutting feed rate: 200 IPM

LC HIGH SPEED
• Rapid travel: 800 IPM
• Cutting feed rate: 400 IPM

• System servo control features: 16 inputs and 8 outputs, real-time reporting of position and velocity, up to (4) axis control

• Techno Windows-based G-Code Interface is included with the system. It provides production logging and reporting, infinite look-ahead, continuous motion, jog routines and so on. Free software updates via the internet

• Moving gantry, to provide large work surface with minimal foot print

• 24VDC input/120VAC output relay to turn router ON/OFF automatically

• Tool calibration touch pad

• Ships assembled and tested

Techno LC Options

Spindles

Multi-Spindle Options

Engraving Head

Automatic Tool Changers

Now Available With Hand-Held Controller

The hand-held controller allows operators the freedom to move around the machine during setup and operation. It provides (touch-screen) control of all machine functions through easy-to-read and understand menus.

Get the full details

Geometrics 200 Martin Lane Elk Grove Village, IL 60007

847-338-0524