Included standard in the LC
Nested configuration are: a 5HP automatic tool change spindle,
5-spindle drill bank, dual "Z" slides, vacuum hold-down system, 10 HP pump, material
location pins, PC/Console and hand-held controller.
Machine
Model
Work Envelope
(X x Y)
Z Travel
Part Number
Price
4896
50" x
118"
5"
HX63VBME48096011
$56,450.
59120
60" x
144"
5"
HX63VBME59012011
$58,950.
78120
78 x 120"
5"
HX63VBME78012011
$62,950.
The Techno LC Nesting Systems are designed to
meet the needs of cabinet makers, custom millwork shops, exhibit, display,
and point-of-purchase manufacturers. Included standard in the LC Nested
configuration are: a 5HP automatic tool change spindle, 5-spindle drill
bank, vacuum hold-down system, 10 HP pump, material location pins, PC and
hand-held controller.
Built on engineering principles that have long been accepted as the
foundation blocks for accurate & dependable operation, the LC series
systems feature: precision ground and stress relieved steel machine bases,
hardened steel linear ways, ball screws on each axis and servo control
The Techno LC Nested Series is also available in several
entry level configurations. These systems feature fewer component options
and lower associated cost, but still provide full nested functionality.
Most importantly, the entry level units provide a straight forward, easy
to apply upgrade path. So, as your production requirements increase,
Techno Nested Series system's
Techno LC (Entry Level 1) Nested Series
Cost
Included standard in the LC
Nested configuration are: a 5HP automatic tool change spindle,
single head drill, dual "Z" slides, vacuum hold-down system, 10 HP
pump, material location pins, .
Machine
Model
Work Envelope
(X x Y)
Z Travel
Part Number
Price
4896
50" x
118"
5"
HX63VBME48096011
$45,400.
59120
60" x
144"
5"
HX63VBME59012011
$47,900.
78120
78 x 120"
5"
HX63VBME78012011
$51,900.
Techno LC (Entry Level 2) Nested Series
Cost
Included standard in the LC
Nested configuration are: a 3HP AC spindle, single head drill, dual
"Z" slides, vacuum hold-down system, 10 HP pump, material location pins.
Machine
Model
Work Envelope
(X x Y)
Z Travel
Part Number
Price
4896
50" x
118"
5"
HX63VBME48096011
$38,600.
59120
60" x
144"
5"
HX63VBME59012011
$41,100.
78120
78 x 120"
5"
HX63VBME78012011
$45,100.
Techno LC (Entry Level 3) Nested Series
Cost
Included standard in the LC
Nested configuration are: a 3HP Router, single head drill, dual
"Z" slides, vacuum hold-down system, 10 HP pump, material location pins.
Machine
Model
Work Envelope
(X x Y)
Z Travel
Part Number
Price
4896
50" x
118"
5"
HX63VBME48096011
$35,850.
59120
60" x
144"
5"
HX63VBME59012011
$38,350.
78120
78 x 120"
5"
HX63VBME78012011
$42,350.
Please Note: Shipping cost are not
included in the above prices
Estimated Leasing Cost
Leasing options are available on a (3) or (5) year basis.
Lease factors are outlined below.
Lease Structure
36 Months
60 Months
10% Purchase Option
.
03082
.01998
You can calculate estimated monthly payment by multiplying your
system total cost by the above factors.
Example: $30,000.would be 30.0 x .01998
= $599.00 per month payment for a 60 month period
Now Available with
Techno LC Nested Series
Some of the Features of
KCDw Cabinet/Closet Software
Beautiful 3D Renderings
WilsonArt® and Formica® Laminate Colors
Custom Frame Construction
Custom Frameless Construction
Detailed Cut/Part Lists
Accurate Estimates, Proposals, Contracts
Hundreds of Door Styles
Entertainment Centers, Wall Units
Floorplans, Elevations, 3D Line Drawings
Inches AND Metric
Cabinet Parts
Door Parts
Drawer Parts
Hardware and Material Reports
Kitchens, Vanities, Bookcases
Over 130 Moldings
Mirror Image a Job
Angled Cabinets, Radius Cabinets, Radius Counter Tops
Islands and Peninsulas
Change Entire Job From Frame to Frameless
Fluted Pilasters, Fluted Cabinets
Create Your Own Moulding
Panel Sides, Panel Backs
• Drive System: Ball
screws with anti-backlash ball nuts (Z Ø16 mm, pitch 5 mm, X Ø16 mm,
pitch 5 mm, Y Ø25 mm, pitch 25 mm)
• Protection: Integral
covers with rubber seals on X- and Z- axes
• Repeatability: ±.001"
• Accuracy: ±.0004"/in
• Resolution: .0002" on
all axes
• Thrust: 200 lbs. (115
kgf) on all axes at low speed
• Motors: brush
servomotors on all 3 axes
• Software Included:
Fanuc G-M Code translator, Windows compatible
• Machine Stand Welded
tubular steel, ground flat, included with machine
• IBM-PC programmable —
interface cable supplied
• Moving gantry, to
provide large work surface with minimal foot print
• 3D linear, 2-axis circular (XY, XZ, YZ) toolpath capability
• 4 patented double
bearing blocks on XZ axes, THK rails and bearings on Y-axis
• 4 T-slots on 50mm
centers are provided to mount the tools on Z-axis
• Rapid travel: 850 IPM
Techno LC Nested Series
Components
Hand-Held Controller
The hand-held
controller allows operators the freedom to move around the machine
during setup and operation. It provides (touch-screen) control of
all machine functions through easy-to-read and understand menus.
Hand Held
Controller Features:
5-1/2 inch Color Touch-screen Monitor
320 x 240 pixel resolution
High-speed USB capabilities
IP 54 Dust Protection
External Emergency Stop Button
3-Meter Chord
Multiple Configuration Languages
Direct PC Connection via USB Port
Requires no DNC Link
Unlimited File Storage Capacity
5 HP HSD Automatic Tool
Changer
Constructed with an aluminum
extrusion body with angular contact bearings housed in cast iron end bell.
Each spindle set comes standard with a set of ER industry standard collets
/ wrenches, vacuum shroud, inverter electronic controls, line reactor for
spindle surge protection, automatic spindle start/stop relay, and
programmable speed control circuit board to allow the user to predefine
spindle RPM within CAD/CAM program.
Features:
Very easy to use and operate
Automatic tool length compensation
Fully programmable rpm control
Very quiet operation
Available in any voltage rating per customer requirements
Equipped with Techno’s Interlock Safety Board
Comes standard with (3) tool
positions, expandable to (16)
5-Spindle Vertical Drill Bank
Features:
Holds five individually selectable drills / Spacing: 32mm
Five drills (3) in X & Y, center is shared
Automatic drill length calibration
Auto tool calibration using Techno’s tool calibration pad
Other configurations available upon request
On/Off functions controlled via CNC
Vacuum Tables
Techno vacuum tables are
designed to be as universal as possible and are easily customizable.
The tables are zoned, allowing vacuum to be applied to specific areas, and
channeled on a 1" grid, enabling rubber gasketing insertion for a secure
seal. This combination enables vacuum fixturing which
accommodates a wide range of hold down requirements.
The unique design of Techno's
vacuum tables also features the ability of joining vacuum with mechanical
hold down. T-Slots interspersed within vacuum panels allow standard
clamping devices to be applied in conjunction with vacuum. This
flexibility is a real plus when dealing with the not uncommon problem of
fixturing warped material.
10 HP Vacuum Pump
100% Oil-less dry Vacuum Pump
(230V-3Phase) Rated for: 173 CFM ,25 Hg Vacuum (81 db), requires a (40)
Amp circuit required. Comes complete with vacuum gauge, filter, check
valve and plumbing to connect to router.
Techno LC Nested Computer
Console (Option)
Includes:
Computer with Techno Servo control caed
Heavy duty computer stand on wheels for easy
movement
Geometrics 200 Martin
Lane Elk Grove Village, IL 60007
