|
• Designed for
continuous heavy-duty applications
• Drive System: Ball
screws with anti-backlash ball nuts (Z Ø16, X Ø16 mm, Y Ø25 mm
• 3D linear, 2-axis
circular (XY, XZ, YZ) toolpath capability
• 4 patented double
bearing blocks on XZ axes, THK rails and bearings on Y-axis
• Protection: Integral
covers with rubber seals on X- and Z- axes
• Home reference and far
end limit switch with a repeatability of ± 0.01 mm
|
• Heavy-duty aluminum
T-Slot table surface which can be upgraded for vacuum table
hold- down
• Thrust: 200 lbs. (115
kgf) on all axes at low speed
• Repeatability: ±.001"
• Resolution: .0002" on
all axes
LC STANDARD SPEED
• Rapid travel: 250 IPM
• Cutting feed rate: 200 IPM
LC HIGH SPEED
• Rapid travel: 800 IPM
• Cutting feed rate: 400 IPM
• System servo control
features: 16 inputs and 8 outputs, real-time reporting of position
and velocity, up to (4) axis control
|
• Techno Windows-based
G-Code Interface is included with the system. It provides production
logging and reporting, infinite look-ahead, continuous motion, jog
routines and so on.
Free software updates via the internet
• Moving gantry, to
provide large work surface with minimal foot print
• 24VDC input/120VAC
output relay to turn router ON/OFF automatically
• Tool calibration touch
pad
• Ships assembled and
tested
|
